per Nos
Pump Model: TB – 04 BSF
Pump Service: Transfer Pumps , Loading Pumps
Flowrate: 34 LPM
These pumps are ideal for Application High Pressure Fuel Oil Pump
Please process the order. If you have any issues or need technical assistance, please feel free to call us on +91 8000078677 or +91 9327264812.
Pump Type | Triple Screw Pumps |
Pump Brand / Manufacturer | SEIM Pumps Italy PB Series |
Pump Model | TB – 04 BSF |
Pump Mounting | Horizontal & Flange Mounted |
Type of Drive | Direct |
Relief Valve | Built – In |
Bearing Location | External |
Bearing Type | Ball Bearing |
Bearing Lubrication | Grease for Life |
Suction Size & Rating | NB 1’’ SAE, 3000# |
Discharge Size & Rating | NB 1’’ SAE, 3000# |
Pump Port Location | Top / Top (Looking From Shaft End, Top IN & Top OUT) |
Shaft Sealing Type | Mechanical Seal X 1 |
Direction of Rotation | CW from Shaft End |
Connections | Gauge, Vent |
Jacketing Type, Media & Parts | Not Available |
Pump Characteristics | Non-Reversible / Uni Rotation Flow Pumps |
Material of Construction | Pump Casing: Cast Iron Sealing Kit: Nitrile Elastomers + Non Asbestos Compressed Fiber Gasket + C vs SiC Other Parts: In Cast Iron / Mild Steel |
General Notes | We recommend using a suction / vacuum gauge at the inlet of the pump & gauge should not show less than the NPSH(A) value even though the suction condition is flooded. The cross section of the suction line should be such that fluid velocity nowhere exceeds 1 m/sec in the suction line and 3 m/sec in the discharge line. The pumps must be protected against solid particles (dirt) in the fluid by using suitable suction filters. The mesh width maximum should be 0.1 mm (For Oil upto 500 cSt) and care must be taken that even with a contaminated filter the admissible suction lift capability is not exceeded. For other viscosity, please consult filtration department |
Documents | 1. General Instruction Manual 2. Standard Warranty Terms and Conditions 3. General Pump Arrangement Drawing 4. General Cross Section Drawing 5. Test Certificate 6. List of Recommended Spares 7. Standard Pump Performance Curve 8. Predicted Pump Performance Curve 9. Assembly & Disassembly Procedure & Videos 10. Installation Checklist 11. Commissioning Spares |
Ask Our Sales/Faculty Get Your Pump Approved | Tag Nos: |
Should you have any questions, please feel to write it to me on chintan@pumpsquare.com
Regards,
Chintan Turakhia.
+91 80000 78677
+91 90049 67867
chintan@pumpsquare.com
Pumpsquare Systems LLP
Manufacturers of Positive Displacement Pumps !
www.pumpsquare.com
info@pumpsquare.com
Best is to Call +91 80000 78677 and get assistance in placing your order. Dismiss