High Pressure Fuel Oil Triple Screw Pump 64 Lpm, Pressure up to 40 bar

By: sales

per Nos

Pump Model: TB – 05 ASF

Pump Service: Transfer Pumps , Loading Pumps

Flowrate: 64 LPM

Item Code:

Product Description

These pumps are ideal for  Application High Pressure Fuel Oil Pump

Please process the order. If you have any issues or need technical assistance, please feel free to call us on +91 8000078677 or +91 9327264812.


Pump Type

Triple Screw Pumps

Pump Brand / Manufacturer

SEIM Pumps Italy PB Series

Pump Model

TB – 05 ASF

Pump Mounting

Horizontal & Flange Mounted

Type of Drive


Relief Valve

Built – In

Bearing Location


Bearing Type

Ball Bearing

Bearing Lubrication

Grease for Life

Suction Size & Rating

NB 2’’ SAE, 3000#

Discharge Size & Rating

NB 1.5’’ SAE, 3000#

Pump Port Location

Top / Top (Looking From Shaft End, Top IN & Top OUT)

Shaft Sealing Type

Mechanical Seal X 1

Direction of Rotation

CW from Shaft End


Gauge, Vent

Jacketing Type, Media & Parts

Not Available

Pump Characteristics

Non-Reversible / Uni Rotation Flow Pumps

Material of Construction

ump Casing: Cast Iron
Covers: Cast Iron
Screw Rotor Sets: Alloy Steel

Sealing Kit: Nitrile Elastomers + Non Asbestos Compressed Fiber Gasket + C vs SiC

Other Parts: In Cast Iron / Mild Steel

General Notes

We recommend using a suction / vacuum gauge at the inlet of the pump & gauge should not show less than the NPSH(A) value even though the suction condition is flooded.

The cross section of the suction line should be such that fluid velocity nowhere exceeds 1 m/sec in the suction line and 3 m/sec in the discharge line.

The pumps must be protected against solid particles (dirt) in the fluid by using suitable suction filters. The mesh width maximum should be 0.1 mm (For Oil upto 500 cSt) and care must be taken that even with a contaminated filter the admissible suction lift capability is not exceeded. For other viscosity, please consult filtration department


1. General Instruction Manual

2. Standard Warranty Terms and Conditions

3. General Pump Arrangement Drawing

4. General Cross Section Drawing

5. Test Certificate

6. List of Recommended Spares

7. Standard Pump Performance Curve

8. Predicted Pump Performance Curve

9. Assembly & Disassembly Procedure & Videos

10. Installation Checklist

11. Commissioning Spares

Ask Our Sales / Factory & Get Your Pump Approved For

Tag Nos:
Pump Flow (LPM): LPM
Pumping Media / Fluid:
Solid Contents: None
Application / Service:
Minimum Pumping Media Viscosity (cSt):
Maximum Pumping Fluid Viscosity(cSt):
Pumping Temperature Viscosity (cSt):
Media Density (Kg / Cu. M):
Specific Gravity:
Vapor Pressure:
Minimum Pumping Temperature (Deg C):
Maximum Pumping Temperature (Deg C):
Pump Flow:
Suction Condition & Head (m): (Max +0.5 Bar)
Discharge Head (m):
Discharge Pressure (Bar): up to 40 bar
Differential Pressure (Bar):
Absorbed Power (kW):
Hydraulic Power (kW):
Recommended Power (kW):
Pump Speed (RPM): 1450 RPM
NPSH(A) (m):
NPSH(R) (m):

Should you have any questions, please feel to write it to me on chintan@pumpsquare.com

Chintan Turakhia.
+91 80000 78677
+91 90049 67867
Pumpsquare Systems LLP
Manufacturers of Positive Displacement Pumps !

Best is to Call +91 80000 78677 and get assistance in placing your order. Dismiss