IL 02 NCB INTERNAL LOBE BLOCK PUMP – 10 LPM IN STANDARD CONSTRUCTION WITH LIP SEAL

By: admin

 1.00 per Nos

Pump Model: IL 21 NLB

Pump Service: Unloading / Loading / Transfer / Circulation & All other application upto Discharge Pressure 6 Bar

Flowrate: 10 LPM

Item Code: IL21NLBLBESLCCXXBXCIICXXC

Product Description

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor inreprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id estlaborum.

Out of stock

Category:

Specifications

Pump Type

Internal Lobe Pumps (Pumping Head for Monoblock Pumps)

Pump Model

IL 21 NLB

Ask Our Sales / Factory & Get Your Pump Approved For

Pumping Media / Fluid:
Application & Duty:
Minimum Pumping Media Viscosity (cSt):
Maximum Pumping Fluid Viscosity(cSt):
Media Density (Kg / Cu. M):
Specific Gravity:
Vapour Pressure:
Suction Condition & Head (m):
Discharge Head (m):
Discharge Pressure (Bar):
Differential Pressure (Bar):
Absorbed Power (kW):
Recommended Power (kW):
Pump Speed (RPM):
NPSH(A) (m):

Hydraulic Power

Hydraulic Power (in HP) = [ Flow (LPM) x Pressure (Bar) ] / 450
Hydraulic Power (in kW) = [ Flow (LPM) x Pressure (Bar) ] / 495
Please note that Hydraulic Power should always be less than the Absorbed Power & Recommended Power

Suction Condition

Flooded (+ve Suction Head)
We recommend using a suction / vacuum gauge at the inlet of the pump & gauge should not show less than the NPSH(A) value even though the suction condition is flooded.

NPSH(R) (m)

Please note that NPSH(R) Stated is for the pump at 1440 RPM.
Following conditions should always be satisfied to prevent the pump from undergoing Cavitation
NPSH(A) > NPSH(R)

Pump Mounting

Horizontal & Face Mounted
Monoblock Pump Head
Pump Face Design to suit B14 FR 71 Type Motor

Type of Drive

Direct Close Couple Design
No Coupling Required as it is built on a Hollow Shaft Design to Suit FR. 71 Motor

Relief Valve

Built - In
Please note that this is just a safety by pass relief valve to protect the pump & motor from over loading. This is not a pressure regulating valve.

Bearing Location & Type

External & Ball Bearing

Suction Size & Rating

0.5" BSP Female Threaded Ports

Discharge Size & Rating

0.5" BSP Female Threaded Port

Pump Port Location

Side / Side

Shaft Sealing Type

Lip Seal

Direction of Rotation

CCW from Shaft End

Maximum Pumping Speed (RPM)

2900 RPM
However, please consult the factory with your detailed application & get the approval

Jacketing Type, Media & Parts

Not Available
Consult Factory if you are looking forward for a customized design.

Material of Construction

Pump Casing & Covers: Cast Iron
Shaft: Alloy Steel
Rotor Set: Sintered Iron
Sealing Kit: Nitrile
Relief Valve Parts: In Cast Iron & Spring in Steel
Other Parts: In Cast Iron / Mild Steel

Prime Mover (In Your Scope) - Recommended

TEFC Industrial Electric Motor (Foot + Face) (B3 + B14)
Power:
Speed:
Fr. S1 Class F NFLP 3Ph 415V 50Hz Eff 2

General Instruction Manual

Add Link Here

Warranty Terms

Add Link

Documentation

Following Documents will be Available on request:
1. General Arrangement Drawing
2. Cross Section Drawing
3. Performance Curve
4. Video Links
5. Instruction Manual

Should you have any questions, please feel to write it to me on chintan@pumpsquare.com
Regards,

Chintan Turakhia.
+91 80000 78677
+91 90049 67867
chintan@pumpsquare.com
Pumpsquare Systems LLP
Manufacturers of Positive Displacement Pumps !
www.pumpsquare.com
info@pumpsquare.com

Best is to Call +91 80000 78677 and get assistance in placing your order. Dismiss